| Last Modified: 11-29-2007 | 1.6 D | |
| Service Category: Vehicle Interior | Section: Door Lock | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000000WI300ZX |
| Title: DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: CUSTOMIZE PARAMETERS (2008 Sequoia) | ||
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize Setting / Door Lock.
(e) Select the setting by referring to the table below.
Main Body (Main Body ECU)
|
Display |
Default |
Content |
Setting |
|---|---|---|---|
|
Unlock Key Twice |
ON |
Function that unlocks only driver side door when driver side door key cylinder is turned to UNLOCK once, and unlock all doors when it is turned to UNLOCK twice. For OFF setting, turning it once unlocks all doors. |
ON/OFF |
|
Auto Lock |
ON |
Function that locks all doors when vehicle speed reaches a certain level. |
ON/OFF |
|
Auto Lock/Shift |
OFF |
Function that locks all doors when shift lever is moved to P from any other position with engine running and all doors closed |
ON/OFF |
|
Auto Unlock/Shift |
ON |
Function that unlocks all doors when shift lever is moved to P from any other position while the ignition switch to ON |
ON/OFF |
|
All Unlock/Open-Close |
OFF |
Function that unlocks all doors when opening driver door within 10 seconds after turning the ignition switch to ON |
ON/OFF |
|
|